Custom stair nosing

Custom Stair Nosing for Straight & Curved Staircases

We make stair nosing from your own flooring, so every step edge matches the floor around it in colour, grain and texture. Straight flights, landings or curved stairs, each piece is made to fit in our Woodbridge workshop.

Light oak stair treads with custom matched stair nosing and white risers
Made from your own flooringStraight & curved stairsHardwood, engineered, laminate & vinylMade in Woodbridge, Ontario
Installed in real homes

The floor carries straight onto the stairs.

Because the nosing is made from the same flooring, there’s no change in colour or sheen at the edge of each step. The stairs read as part of the floor rather than something added on.

Close-up of custom oak landing nosing matched to the floor beside white balusters
Landing nosing matched to the floor
Oak staircase with custom matched stair nosing, white risers and white balusters
A full flight with matching step edges
What is stair nosing?

The finished front edge of every step.

Stair nosing is the shaped front edge of a stair tread or landing. It protects the edge from wear, gives your foot a clear edge to find and creates a clean transition between the floor and the stairs.

Store-bought nosing rarely matches a new floor exactly. We make yours from the flooring you’re installing, so the edge looks like it was always part of the floor.

Off-the-shelf nosing

Close, but not quite

  • Colour and grain rarely match your floor
  • Limited profiles and thicknesses
  • Visible change at the edge of every step
  • Straight lengths only
Custom Stair Solutions

Made from your floor

  • Made from your own flooring
  • Shaped to your floor’s thickness
  • Seamless from floor to stairs
  • Straight, landing and curved pieces
Profiles

Shaped to suit your floor.

Every profile is made from your flooring and sized to your stairs.

Low-profile custom oak stair nosing that overlaps the stair edge

Low-profile nosing

A slim profile for thinner floors like laminate and vinyl

Thick custom oak stair nosing with a groove to receive the flooring

Grooved nosing

Grooved to take the flooring on the tread

Custom oak stair nosing with a squared front edge

Square-edge nosing

A crisp, squared edge for a modern look

Three custom stair nosing samples in different flooring colours

Any colour, any finish

Made from the floor you choose

Oak staircase with custom stair nosing turning down past white balusters and a wood handrail
Matching nosing on a staircase that turns.
Straight & curved

Made for the stairs you actually have.

Every staircase is different. We make nosing for straight flights, landings and turning or curved stairs, cutting and shaping each piece so it fits your steps and lines up with your flooring.

  • Perfect colour and grain match
  • Straight and curved pieces
  • Landing and step-down nosing
  • Durable, wear-resistant edge
  • Clean, timeless lines
  • Inspected before pickup
Where it’s used

Everywhere a floor meets a step.

Stair edges

The front edge of every step, where the tread meets the riser.

Landings

A finished edge where a landing floor drops to the next flight.

Floor-to-stair transitions

Where your new floor meets the top step, without a visible seam.

Step-downs

Single steps between rooms, sunken living areas and entries.

How to order

Four simple steps.

01 / MEASURE

Measure your stairs

Count your steps and landings and note the width of each one.

02 / SEND

Share your flooring

Tell us the flooring you’re installing, or drop off a few boards.

03 / MAKE

We make your nosing

Each piece is cut, shaped and finished in our Woodbridge workshop.

04 / PICK UP

Collect and install

Pick up your finished nosing, or we’ll deliver it to your project.

Stair nosing questions

A few questions,
answered clearly.

Not sure what you need? Send us a photo of your stairs and we’ll take a look.

What is stair nosing?

Stair nosing is the rounded or shaped front edge of a stair tread or landing. It finishes the edge of each step, protects it from wear and creates a clean transition between your flooring and your stairs.

Can you make stair nosing for laminate or vinyl flooring?

Yes. We make nosing from hardwood, engineered wood, laminate and vinyl, so the nosing matches the colour, grain and texture of your floor instead of using a generic moulding.

Do you make nosing for curved stairs?

Yes. We make nosing for straight stairs, landings and curved or turning staircases. For curved work, send us photos and measurements so we can plan each piece.

Do I need to supply my own flooring?

Usually, yes. Using your own flooring is how we get an exact match. Send us the product name or a sample and we’ll confirm it’s suitable before we start.

What is the difference between stair nosing and stair treads?

Nosing is the finished front edge of a step; a tread is the whole horizontal surface you stand on. If you’re replacing the full step, see our custom stair treads.

Can I pick up my order?

Yes. Completed orders can be collected from our workshop at 57 Ashbridge Cir, Unit 1, Woodbridge, or we can arrange delivery to your project.

Related reading

Learn more about custom stairs.

Start your order

Ready to match your stairs to your floor?

Tell us how many steps and landings you have and what flooring you’re using. We’ll confirm the details and the next steps.